Instructiuni in limba romana
JKWQR can be integrated into Home Assistant (HA) through the Mosquitto broker!
Don't check "Broker MQQT" in settings if you don't have HA !
Sensors are sent every 2 seconds !
JKWQR has implemented for HA a separate general index for charging/discharging so that you can add the battery to the energy panel.
Video: Instructiuni in limba romana
Video: Instructions in English
Download
Version JKBMS 1.144Q9dHA, without inverter
Check the file length : 1734720 bytes
Version JKBMS+INV 1.144Q12fHA, with inverter
Check the file length : 1759168 bytes
User manual JKWQR
This module only works with JK BMS series bms, it has not been tested with JK BMS balancer !
Warranty 36 months from the moment of activation !!!
Breaking the label (unsealing), as with any product on the market, leads to the loss of the right to change your module!
Changing the module is free, less the cost of round-trip transport!
Internet monitoring at "https://jkbms.wqr.ro" is free! If you want a personalized address, please contact us at jkbms@wq.ro!
The first connection to the module
Power the module to a source of at least 1A (real) with micro usb cable, an old phone power supply for example.
200mA is sufficient for operation, but 1A is mandatory for Update
Wait 15-20 seconds until the jk-bms SSID appears on the WiFi network in your phone
Connect your phone/laptop/pc device to the jk-bms WiFi network.
The default password is 12345678.
After connecting, the phone/laptop/PC tends to disconnect automatically because there is no internet!
Specify when the message appears to stay connected to the jk-bms wifi network!
Enter the address http://192.168.254.1(on mobile) or http://jk-bms.local(on pc/laptop/tablet)
Click Settings
I recommend checking the box -Show password- to see what you enter.
It doesn't matter the order in which you set! Don't forget to apply Save.
After you have set everything click on Restart.
You can also enter the settings after connecting to the IP address assigned by the WiFi router "http://ip_allocated", for example "http://192.168.1.112"
Certain routers don't support it, but you can try with http://jk-bms.local or what you specified at Ap SSID followed by .local
Example: http://jhon.local if you specified at AP/Site SSID jhon
If the module has successfully connected to bms and wifi, please enter in the settings again and apply Save both: wifi and bms settings, then Restart.
When you want to change the BMS you are connected, go to Settings,
pass the new and mandatory model to Addr: 00:00:00:00:00:00 .
The same procedure if you want to change the router, Addr: 00:00:00:00:00:00!
For internet monitoring with any device, use the address:
https://jkbms.wqr.ro/?serial=xxxx-xxxxxxxxx , where xxxx-xxxxxxxxx is the serial given on the label applied to the module
but you can also find it in the settings.
To install the web app, follow the steps in the link
How to buy ?
Computers SRL, All rights reserved @2023
This site not use mysql, phpadmin, wordpress .... For your info....